Reading about Sabrent products on the Internet, seems like I have to also ask questions that I would assume should not have to be asked: - What is the maximum supported device capacity? - Does it...
Reading about Sabrent products on the Internet, seems like I have to also ask questions that I would assume should not have to be asked: - What is the maximum supported device capacity? - Does it...
Oh, it's also JMS561U, isn't it... At least for those who actually bought it. https://forum.odroid.com/viewtopic.php?p=304941
Hello, Could you provide more information about this product? https://sabrent.com/collections/enclosures/products/ec-uasp - Which chipset does it use? I've bought a DS-4SSD and found out it is in...
No, the DS-4SSD is NOT JMS567+JMB575. It's JMS561U, which is by the way unsuitable for SSDs because it does NOT support TRIM/DISCARD, it does NOT support hot-swap or even hot-plug, and has all kind...
snippet of disk management which I believe shows them as unallocated?
@Sabrent I am a bit unfamiliar with doing that, so can you tell em how? Thx
@Jeff morris Make sure the drives are not allocated to Windows Storage Spaces. Then you can prepare the drives in Disk Management.
I have loaded all 4 bays with drives and my system is not seeing it. I switched the docking station to a laptop and it does not see it either?
Sabrent- Just plugged in my 4Bay 3.5 HD Docking station and it is not appearing in my registry? Drive is in, powered up great, connected to desktop properly but nothing. The light is blue and the f...
@ted.lillys That port is to provide additional power for devices that require it. I am not sure about the default behavior, that would require additional testing.
There is a USB-B micro port on the front of the switch. What is that for? Is there any reason the switch would default to the B port when booting up. I'm using the switch to share a keyboard betwe...
@Michael Wheeler The CH SN530 is 2230 and extra care must be used with 2230 drives in this enclosure as it lacks security points for that length. Otherwise, please make sure everything is connected...
Hi, I'm trying to read a Western Digital ch sn530 nvme drive in a EC-SSD2 but the unit doesn't recognise it, the light displays a disk is inserted, but nothing within windows or linux. ...
@D H You should be able to extend the partition manually with a program like MiniTool Partition Manager or with the built-in Windows Disk Management.
@Ryan Rayna Let me know if you have gotten satisfaction on this issue. Thank you.
@Rick Raborn If the enclosure is getting sufficient power, this is an issue that requires either a firmware update or an RMA. There may also be a problem with the cable. The thermal result is normal.
@Ethan Lin The Rocket 2230 will work perfectly in a PCIe 3.0 M.2 slot. As technology moves forward it is ideal to use newer hardware for overall performance and efficiency and that means a newer PC...
Are there any plans in introducing a lineup of NVMe 2230 in gen 3 speed as the majority of consumer purchasing this form factor is for the steam deck and it is only rated for pcie gen 3.
I've been using your M.2 enclosure with one of your own SSD's. I have a 512GB Rocket installed. The issues I have are that the drive keeps disconnecting unexpectedly (and I have its USB controller ...
@david123443212000 The FW updater only applies to EC-DFLTs that use the JMicron chipset. For ones using an ASMedia chipset instead, the firmware is either up-to-date or can be acquired through the ...