Okay. Thanks. That would mean it should still be able to do 450 MB/s writes. I actually tested it on a newer machine with USB 3.10 host controller (whatever that is) and it copied over at 420 MB/s ...

I have a SAMSUNG 990 PRO w/Heatsink SSD 1TB PCIe 4.0 M.2 . (2280 form factor). The height of the SSD is 8mm (measured). Is there are model of external USB C enclosure that will fit this ?   ...

@siejeje205 Good luck!

Thank You :) It's very old now so not an option :) I will get it soldered, 

@Richard Hanks The unit is capable of hitting up to USB 3.2 Gen 2x1 speeds, or 10Gbps. This is shown as 3.1 Gen 2 on the Tree Viewer for the device. If it and/or the port is operating at USB 3.2 Ge...

@siejeje205 Below is a picture of the original component showing the intended directionality. We do not provide circuit diagrams. If the drive is within the warranty period, you may be able to get ...

Hi, So i have a mega fast Samsung 990 Pro m.2 drive on my motherboard and i'm copying a 10 GB file from it to another Samsung SSD connected to sata on my motherboard and it copies to it at 460 MB/...

Hi, when i took out for cleaning my ssd something broke off, i have it but i don't think there are any markings on it. All my data is on this drive. Can someone tell me what do i need to place ther...

Did anyone ever figure out bypassing the individual 10 power buttons?  Even if it voids my warranty I'd be willing to try it.  Gotta be some way to open the enclsoure up and bypass the in...

@mad-jester Is using the ASM235CM, ASM1543, VL822.

@mad-jester Linux should be supported. I'd have to verify the chip(s) being used, which could impact hot-swappability.

@Sabrent Oh, there is a new model! Cool! 😄 I was definitely not expecting it being so simple! It's almost twice as expensive, but it has 5 slots, and it's 10Gbps USB 3.2. And I assume it supports...

@mad-jester Check out the DS-5R15.

Hi! A year ago, together we've discovered that the DS-4SSD has an old chip flashed with a broken firmware (JMS567 flashed to pretend to be JMS561U), and you've mentioned that you'll request them t...

@Nick Coronado Unfortunately, the USB-C PD port is for PD input only.

@Bryan Ischo If Windows To Go is an option, with Rufus or equivalent, that might work. I have requested a firmware update tool. As for failed I/O, that is often due to physical damage from a bent P...

I am trying to connect 2 serial devices through the USB Type-C hub. The USB 3.0 device is recognized as a serial device. The USB-C device is plugged into the port labeled 'PD' and is receiving powe...

@Sabrent not work, tested yesterday afternoon. i have loose my work . never sabrent again  

@tino serraiocco It is difficult to retrieve data from modern SSD cards if it's not readable on the camera or through a card reader. Some specialized data recovery services may be able to restore t...

@Jeffery Griese One issue may be that not all 1TB SSDs are the same size. They could be 1000GB and 1024GB, for instance, which could effect cloning depending on the direction.