@Mark Levine It could be that specific drive. macOS does have settings and "tricks" for this sort of thing, better covered in the Apple support forums. Seagate also has tools and information on con...

TB5 KVM equals:  

@Sabrent This is hooked up to mac. I have a macbook connected to a Mac studio display. The Tower is connected to a usb-c on the back of the display. I don't see any power settings that I can fiddle...

Interested on this and in the market currently for a Thunderbolt KVM to help with my mac and windows laptops. Any updates that you can shed on this would be helpful 😊

@wynneke Yes, or the archive file can be extracted to a temporary folder and the executable run from that location.

@freedevme Three years is a long time. Most SSD warranties are only for five years. The health reading from SMART is usually based on writes, but this value may not be precise as host writes and NA...

Thanks. So just double click on exe in zip file. Correct.?

Hi I checkd my 2TB rocket 4 plus with Hard Disk Sentinel and found the health is 90% , why it was dropped like that ? I use it for Windows 11 system for about 3 years also using its custom cooler....

@wynneke The firmware update is a Windows executable for the Realtek 9210B bridge chip inside. Attempt to do the verify after completion and not as part of the imaging process, also.

@Mark Levine This could be a power or USB setting in Windows and/or the UEFI but could be that specific unit or when a certain drive is anywhere in the docking station. Might be possible to modify ...

@Temo 40-pin is legacy but we do and did make products to handle that. 40-pin will be explicitly listed for such products.

@schallerp This behavior is anomalous and has been marked for feedback. If this issue reoccurs, please contact support.

I just got the 4 bay station. ( this is the second one, I've owned another unit for a few years) and I have 3 drives in it. One continues to turn the blue light one and spin up the drive when nothi...

Still no fix 😞

I downloaded the firmware update on the website but there are no directions on how to execute.  I may not need this firmware update but I want to try as my Macrium app locks up during verify....

Hello again. So I was abouth to start to copy my disks, but then I see that halvf of my disks are with 40 pin IDE contacts, do sell an enclousure with IDE interface or any other solution for me to...

@Temo You should be able to migrate files normally from Documents and similar without any problems.

I cloned a HDD(1TB) to an SSD(1TB) and the fourth blue LED never stopped blinking even after leaving it over night, 14 hours. I shut it off finally and removed both drives and then installed the S...

Thanks, yes that was my plan, to insert the usb-drive after the laptop is up and running, and not boot with it connected.  Terje

@Temo After connecting the DS-UFNC unit to the computer, make sure you enter the BIOS/UEFI and check the boot order. Avoid booting to the external/SCSI enclosure/drive. Or, you can attach the enclo...