I'm new at this and have a question. I have the Sabrent USB 2.0 to SATA/IDE hard drive adapter.  I have an older Dell Inspiron that came with an M.2 2230 128gb drive. I want to upgrade to an M...

Was this ever resolved?  I'm also having difficulty cloning a Raid 5 with 4 drives.  It appears that everything copied over, however, I get an error on boot that there has been a configur...

So, anything new on the 16TB SSD?

The Thunderbolt 5 version of this with EDID and HID emulation would obliterate all TB5 docking stations competitors!

Final note on the matter: there appears to be no way to update your products to allow for the larger drives to work with them. I am getting a SATA to 3.0 USB cable today and if that works I will co...

@wmp3662 This is a consequence of wanting to support larger drives on legacy systems.

FYI .. this later info has to do with the EC-DFLT docking station. I bought a new one and it would not read the hard drive. I read up on the entire issue and it has to do with the device looking fo...

Tried the update today but it didnt work. I accidentally updated the older docking station (also an EC-DFLT) and now it doesn't work. Tech support to get back with me on this tomorrow.

@danieltrogdon Some third parties sell adapters that will work with the DS-U3B4, please look for those or contact technical support on our site for specifics. The specifications I have here are: 10...

@wmp3662 Thank you for the update.

Bought another unit and still having the same problem. Sent a message to SABRENT Tech Support. Awaiting answer. Apparently the problem is the chipset. The JP chipset needs a firmware update but wh...

I pulled mine out of storage but can't find the power supply, so I please need the specs for buying a replacement.

@kevin Please contact technical support/customer service via the website, thank you!

@tavellone 2.5" adapters are intended for SATA drives, not NVMe.

I guys. someone have news?

I have a unit with a lower serial number.  Is there a way to get the fix?

I believe they call these EDID and HID emulation. If you guys come up with a Thunderbolt 5 switch that does both EDID and HID emulation, you'd be selling out in no time!!

Thanks for the reply.unfortunately the 2.5" adapter is the only solution because my pc is a WORKSTATION HP Z2 Mini G3 where there is not much space inside (https://www.digitalengineering247.com/art...

@tavellone You would be best served by a single NVMe to PCIe adapter, such as the EC-PCIe or, optionally, the EC-TFPE.

hello. I am looking for an internal adapter for this Crucial disk (Crucial P3 Plus SSD 2TB PCIe Gen4 NVMe M.2 Internal SSD, Up to 5,000 MB/s, - CT2000P3PSSD801). I am looking for a sabrent adapter ...