@bikeman09 If you have an older unit you should request a firmware update from website customer service, if they cannot provide that they may offer a replacement unit.

Hello All Have the Powered USB Hub plugged into Power outlet on my UPS Battery Backup surge only outlets,  some reason if i plug more than 4 devices in, i get a Message in Windows 11 Pro--Not...

To support This morning, I hear a bee sound and saw the LED was off on power supply, and observe the selection switch can't functionand no light on. When I try to remove the power jag from SB-TB4...

@naustodark - "Ps: and about the last firmware, do you provide them or it's outdated? Can be changed the "Sleep time" using the MPTOOL (DISK_IPS_THRES = )?"Anything can be changed or even added in ...

@jay - Depending on what you use.  Some may or may not include the Windows Recovery Environment which is the Recovery partition you are referring to as well as the OEM Recovery partition if th...

I am actually on v1.34.39.032625 from station-drivers and used the .cfg file from the SABRENT supplied v1.33.

@naustodark 5Gbps USB should have UASP support as long as the operating system supports it. Windows XP needs to be updated to have full functionality with this. A 1m cable should pose no problem. A...

@jnburnett2003 EC-P3X4 is the proper model, the "PC" might be a typo. The units look the same, distinguished by the x4 PCIe connector rather than the x16 of our bifurcation-requiring AIC. We have a...

I was searching online for an adapter and I saw your NVMe M.2 to PCIe Adapter. On Amazon.ca (www.amazon.ca/dp/B0BRYQH443/) as I'm from Canada, I see the model as PC-P3X4. However, when I check your...

@Sabrent "The operating system has to support UASP for proper operation": I know i will get less than 5 gbps, but i want to know if i can connect it to my Windows XP and transfer files (using a P...

@naustodark The operating system has to support UASP for proper operation. Connecting at baseline USB 3.0 speeds will max performance at 5Gbps with 8b/10b encoding, so 4Gbps before overhead. Topogr...

Hello. I'm planning using the enclosure NVME M.2 10 Gbps "EC-SNVE" on Windows XP connected with a PCI-E USB 3.0 (Via labs), but i want to confirm if it will work. Can i connect the enclosure and ...

@Aurelio jin You won't see much load time difference between Gen 4 and 5. At least for now. DirectStorage may make faster storage more relevant in the future. Gen 5 drives are already starting not ...

Thanks for the prompt response, I now only buy hardware from companies with good forum support. I'll check out those utilities. Agree about backups! - I usually use Macrium Reflect. p.s. for some...

Hey everyone! I’ve been building PCs since the SATA days and recently noticed a lot of buzz around PCIe Gen 5 SSDs — blazing speeds, insane benchmarks. But realistically speaking: ...

@jay Since the drives are differently-sized, you might want to make sure things are straight with a partition manager. MiniTool Partition Wizard works well. As for cloning/backup, Acronis is pretty...

@Manuel Jordan It means that, say, Thunderbolt 4 devices work best with Thunderbolt 4 compliant hosts/ports and that using it on an older machine could result in a reduced experience. This is less ...

Thanks for the explanation. BTW , thanks to the free Acronis (great offer) I did manage to successfully clone my existing 1TB Samung in the HP to the new 2TB Samsung 990 Evo Plus in the Sabrent EC...

@Nathan - This is from my recently Amazon.com purchased and received on July 28, 2025 SABRENT EC-SNVE.  Stamped code 2509 which is probably Year 2025 Week 9 (February 23, 2025-March 1, 2025)St...

Hello Friends @Sabrent pls, remove the "cristianbells716" comment, it has a link to an unrelated place @taylercoooper  Your idea makes sense and is technically feasible — installing...