- 5 stars: 65 (80%)
- 4 stars: 11 (14%)
- 3 stars: 3 (4%)
- 2 stars: 1 (1%)
- 1 star: 1 (1%)
È possibile sfruttare l’uscita a 2.5mbps del modem grazie ad un cavo ‘almeno’ di Cat6 e a questo adattatore.Linea stabile e senza interruzioni. Si connette ad una presa usb che sia almeno 3.0.
Per ora sembra andare bene.Con la Ftth di Iliad raggiunge la banda piena.Essendo in metallo e non plastica, sembra più resistente.Stranamente andava più piano collegata col connettore Usb C, mentre con il connettore Usb A nessun problema.Ma quello penso dipenda dalle mie porte del Pc e non dall'adattatore.
The media could not be loaded. Couldn't easily find a motherboard with a 10gb ethernet on board so i decided to give a try to an external thunderbolt3 10gb ethernet adaptor and found this one... works great!Having some troubles with Windows 11, after rebooting the card is not recognized anymore, but with a shutdown and restart it works fine, Couldn't get why.The quality of the product is very good.
Didn't start using it until after the return window closed. Randomly disconnects from network.
Works with Mac OS 12 with no additional drivers.Sabrent 2.5 Gigabit Ethernet Adapter:Type A - (download: 1.8 gbs, upload: 400 mbs)Type C - (download: 1.1 gbs, upload: 400 mbs)Stock ethernet on 2020 Mac mini M1:Download: 980 mbs, upload: 950 mbs.Because the significant decrease in upload speeds I will not be using this ethernet adapter. Also the increase download speeds do not translate to additional mbs when actually downloading a file. Maybe in the future download servers can match the 2.5 ethernet download speeds.Internet Provider is Google Fiber with 2GB down and 1GB up,
The adapter feels solid but the rubber case that is on it potentially hinders the ability for it to passively cool itself. The temps are over 110°F as well! You may need to update the firmware to hit these speeds and you'll need to tweak the window size in any iperf tests.
I couldn't find any clear indication this works on Mac so here goes:tested with iperf: 2.33 Gbits/secifconfig reports: 2500Base-T
Says it all
Funktioniert sehr gut mit Intel NUC8 Mini PC. Weil kein PCIE vorhanden habe ich über Thunderbolt Anschluss angeschlossen und es funktioniert super.
Two of those adapters on two NUC8 running Debian and Proxmox. When using Debian 10 and Proxmox 6, the driver would recognize the adapters and hold 10G speed for a few hours, maybe days, before completely crashing (interface becomes unavailable).Since upgrading to Debian 11 and Proxmox 7, in the hope of a better driver support, it doesn't even get recognized anymore.Even after compiling the driver from source (atlantic driver), upgrading bios, TB firmware, Sabrent firmware, it still isn't working.If you are running this with linux, I would not recommend this product.
The entire unit slid out of the metal housing repeatedly while I was setting up, the plastic endcap doesn't have a large enough hole to accommodate the RJ45 so the whole circuit board would regularly fall out of the housing when trying to move cables, other than that, it worked at 2.5GbE tested with iperf3.
I have looked at different means to connect to my QNAPs 10gbe port. I have compared the internal ASUS 10Gbe card and this 2.5gbe card. Of course, the Asus card is better, but because of the way most boards are assembled any more, it occupied a 16x slot in my x570 motherboard. That's a hard thing to give up, especially when you're trying to run water cooling lines and that card puts out some significant heat.This does not perform as well as a 10Gbe card, but the connection speed on a direct cable to my Qnap 963 unit still performs very well, and makes data transfers off of my main network possible, lowering the hit that my Plex takes everywhere else. Price for performance is pretty good.
Great product! Gives me good speed with stable connection.
This worked well and negotiated 10gbe just fine with my switch. According to my cheapo IR temperature gun, it runs slightly hotter (117F) than the Sonnet (115F). It's also consistently about 150-200MB/s slower than the Sonnet in my testing with 10GB file transfers and iperf3.
No drivers required for Ubuntu, it just works :)
Bought one of these to be able to hook up a NUC, and occasionally a laptop to the 10G network I have. Works great, it's able to get 10G over the CAT6 I have installed. It does get a bit warm, so keep that in mind when you place it down somewhere.
Bought 2 of them to upgrade 2 HP Proliant Microserver Gen8 to 2.5Gbps and they work like a charm.
Setup was super easy, in that I plugged it in. This is my first adapter from Sabrent, but the third adapter I've had to buy for my notebook. The first two had poor physical connectivity. One was very loose in the USB-C port on the computer, the other, didn't hold the ethernet cable far enough in for it to maintain contact.My expectations were low going into this, but it has a nice metal build, firm connection with the USB-C port, and not a lot of give with the ethernet. Very happy.I also like how the lights for power, link, and activity are on top, so I don't have to route the cable to see the end of the port.
It gets pretty warm, but delivers on the speed. I can’t ask for much more. The speed is real and the Thunderbolt versatility is exactly what I was looking for. Hello his is an aqua tic adapter and the PCI express version of this adapter provides identical speed. You won’t be disappointed with this.
Pros:• Fast. Read and write speed more than enough for 4K ProRes video connected to a QNAP NAS - see attached speed test image.• Compact 5" x 3" X 1".• Quiet, passively cooled, bus powered.• Newer than other 10G adapters on the market.• 2-year warranty.Cons:• Does not "wake up" when the Mac starts up. The Thunderbolt bus detects it, but no data connection with the NAS. Unplugging the TB cable and hot-plugging it back in wakes up the unit to establish data connection.• Sabrent have no information on this 10G adapter on their website. Nothing about if the unit has a sleep mode. It comes with a user manual that just shows how to plug it into a computer, but who needs a manual to plug in a peripheral?• It gets hot. (Not hot enough to cause any burns.)• New to market, unproven. There are no comparison tests and reviews.Taking two stars away for the lack of troubleshooting documentation and the annoying connection issue.
Use it to hook my computer up to a QNAP NAS with a 2.5 Gbs ethernet interface and regularly get > 1Gbs transfer rates during backups.
It’s been hit or miss with my MBP
Please note that Amazon tends to thrown the different Sabrent Ethernet NICs into the same pot, even if they are very different devices.This review is specifically on the Sabrent TH-S3EA, one of two Thunderbolt 3 Ethernet NIC variants that Sabrent sells. There are at least two different USB3 Sabrent variants based on two distinct chipsets (RealTek for the 2.5GBit, Aquantia AQC-111C for the 5Gbit), which are a different story entirely in terms of driver support.The TH-S3EA is based on the Aquantia AQC-107 now owned by Marvell. I am mostly using it on Intel NUCs and with Linux (CentOS7+8), but sometimes with Windows 10 as well. In both cases the driver support is very good right now, current builds of CentOS7+8 (and surely Debian/Ubuntu variants, although I didn't test them) recognize PCIe based Aquantia NICs right from the start. For all I know, this should even work in a Hackintosh (not tested).What you get is really an Aquantia ACQ-107 PCIe 2.0 x4 NIC in a Thunderbolt form factor, thanks to an Intel Titan Ridge TB3 chip, that forwards 4 PCIe lanes from the host to the NIC and this is the reason, no special drivers are required. I've been using the ACQ-107 PCIe variants in workstations and servers for many years with zero problems and found them very reliable.They don't have any of the fancy SR-IOV, VMDQ or iSCSI features that Broadcom, Emulex or Intel chipsets supported, but basic Ethernet works just fine, without any glitches, comparable ease and performance to Intel NICs, which only very recently became similarly economic (€) and economical (Watts). All speeds from from 100Mbit/s to 1/2.5/5/10Gbit/s are supported, energy efficient Ethernet, jumbo frames etc. are available and work as well.While Aquantia as a company was basically built on providing NBase-T PHY transceivers that use much less power than competing products from Intel/Broadcom etc. at the time (those were easily 10Watts per port), 10Gbase-T still uses quite a bit more power than Gigabit-Ethernet, so if you hang this on a battery powered notebook, this NIC will suck its weight in power: yes, it is quite massive and heavy to cool all that Wattage away! But at least it will do that, while I've had e.g. a QNAP 5Gbit USB3 Adapter based on the AQC-111 fail sporadically, due to overheating.So it's a perfect match for NUCs or ultrabooks while connected to a Thunderbolt hub. If the power supply for you ultrabook doesn't provide at least an extra 10 Watt of power for this device, you may face issues just when you need it the least.To the harried road warrior I'd recommend 2.5Gbit Realtek USB3 NICs, at least as long as they don't run Linux, because driver support there isn't that great.What really pushed me upgrading from 2.5 and 5Gbit variants to three of these is the current price: At around €150 they are just 50% over the PCIe ACQ-107 add-on cards, which just won't fit into notebooks and NUCs. But the packaging and the included cable are top notch, the rubber sleeve a very thoughtful extra. Everybody else has you pay quite a lot more for a less well made package.10Gbit/s rarely actually delivers 10x performance on most network tasks, while switches etc. are also noticeably more expensive than Gbit stuff. But when you're ready to pay the premium, these NICs are the best among their peers.The biggest competition to these Thunderbolt NICs actually comes from Thunderbolt itself: If you only ever need to connect two systems, you just link them via a 1:1 cable on Thunderbolt directly to establish a 10Gbit/s network connection with far less energy and latency than these.This model can theoretically be expanded to more than two systems when you have dual Thunderbolt ports on the middle-men, but after spending a couple of days trying to make that survive reboots and replugging of cables, I decided that a couple of extra hours of productive work would easily pay for these adapters: Your milage may vary and hopefully a smart protocol will give us the peer-to-peer Thunderbolt networking, the hardware basically delivers without the overhead of Ethernet.
Works as intended, now I use the 10gbps usb-c plugin for internet, didn't even have to upgrade the internals to get the speeds I wanted, thanks
This thing let's my laptop rake advantage of my question gigabit connect. The old machine does not struggle while downloading anymore.I love it, however I would have preferred a White one.
This 10Gbps Ethernet adapter is a compact and fashionable design. I use M1 Apple Mini Mac and Synology NAS connection to read and write data up to 600-800m / s, because there is no fan, so there is no noise. But the work is very hot, even if the computer is in sleep, it has a certain temperature.
Using on a micro form factor PC that can't use a PCI card for faster network connectivity. The USB 3.0 works nicely for this. The 5 gigabit ones don't work as advertised, they might get 3.5 gigabit throughput. Not worth it.These adapters make a good value for the speed you get. I bought one for the PC, and one for my Synology NAS.
It works
This was the first thunderbolt, and first 10gb device we have in our new network. Sooooo, thunderbolt needed drivers that I wasn't expecting, and I can't verify the 10gb speed until our new switch arrives later this week. But it works fine at 1gb for the moment and it feels well made.I'll try and update this review once the new switch gets here.