4K HDMI Extender Over CAT6 (60 Meters / 200 ft)

Bought this as I wanted to try it on a car with a short-ish selfie stick extended to about 50cm or so and using my Insta360R camera.Whilst this is strong enough for me to trust it connecting the camera directly to the screw thread, I don't trust it not to fall off when used with a stick. Too much wobble and slip for my liking.Not the products fault, just plain physics and the wieght of the camera I guess

ottimi materiale , magnete potente

Attached to the top of a steel tower to film a sequence of assembly operations. So strong that I had difficulty in removing it. The next time I used thin foam between the base and the steel, worked fine.

Does what it says. nice!

Purchased for mounting my insta360 to car or metal surface for action filming. Rubber coating is good, but would be better if had a soft pelt so it wouldn't mark or potentially scratch car paint. Other uses are a stable stand, easy adjust top pivot, secured base when unattended recording and good quality construction with metal bearing ball. Will recommend.

Good magnet, bigger than expected.

Powerful little suckers. Had a different brand before with a smaller base but these appear to be more solid than my old one. Oh yeah, who ever warned us about 2 sticking together? They are right a knife and a screw driver to separate. CAUTION. Mine was an accident. Drop both on a bed and clap!

The tripod was stable, malleable, and perfect for my cameras. I placed it on the net, fence, and post to film my tennis matches. It seemed more stable than the other gorilla pods out there.

Very Strong magnets and gets a good hold of the ball when you tighten it up keeping the camera on you desired position. I’ve been impressed so far and it’s a good price.

First impression is good, haven't put it to the test yet.

This magnet is SOOOO strong. Not recommended if you have a pacemaker or anything of that nature. I ordered two large after the small did a great job for my exercise videos with my GoPro Hero 9 and Insta360 One R. The two large accidentally stuck to each other when I accidentally opened them and set them near each other. It took two people and two flathead screwdrivers to pry them apart, which damaged the rubber coating. However, it still worked well at the gym. Since the magnetic force is very strong, I have to slide the magnetic side off to the edge of whatever it is stuck, so it is easier to grab it off when half is off the edge. Again, it is SUPER STRONG - NOT RECOMMENDED FOR PERSONS WITH PACEMAKERS OR OTHERWISE METAL IN THEIR BODIES!!!!

Habe die Zugkraft des Magneten etwas unterschätzt, hält Bombenfest! ... was ja eigentlich auch gut ist,aber das Teil wieder wo abzukriegen - da man den Magneten ja nicht trennen und somit deaktivieren kann -ist gar nicht so einfach... ohne die Oberfläche zu beschädigen!? Werde hier zukünftig wohl eine dünne Gummimatte oder so was dazwischen legen... mal schauen was sich hier am besten eignet...

Great pulling power on the magnet and in confident the device will do the job its meant for. Lost a star for me as the 'tightener' was spring loaded and loose. I took the device apart only to realise it is loose for a reason - to help you tighten it when it hits the base. (I swear this makes more sense when you have the product in hand). So I faffed around for ages and considered a return before realising the device is actually made as intended. My fault really but this was not clear at all.

So really solid base..and I use it around the house with my KDD tablet holder. Wide base is stable and works great for non magnetic surface. If I use it on iron surface the magnet is super duper strong and as strong as I am is very hard to remove without a very hard yank. I bought the smaller base and will see how that one turns out.

This is truly an outstanding mount. If you need a magnetic mount, you cannot do better than this model. The rubber coating protects the surface on which it is placed and that is a huge plus. Moreover, the coating does not decrease its holding power (this magnet is VERY powerful!) Highly recommended.

I like it. It's so strong.

The magnet is almost too strong, but that results in a very stable picture while underway.

I just go a Go-Pro and have a mount for my bike etc but this means you can get really smooth shots whilst driving. I am constantly swapping things about and have a bike rack and go from place to place but when I feel I need the car drive shot, its simple to set up, get your shot and then pack it down again. Very firm mount. I leave it on the inside of my car door which is metal so I always have it to hand.

Very strong earth magnets, I like the size. Its better than the Rigwheels one I paid $50 for at B&H and it's cheaper! Ball head is descent. The safety tether is nice touch. I will buy another one. Highly recommended.

Really surprised by how powerful this is - much safer than using a sucker to mount, say, an action camera.

Absolutely awesome so far. Great holding power. Only owned it a month, but so far it is awesome.

I can pretty much use any camera and standard glass. Great value

Powerful product. I'm happy .

It is a high-quality and inexpensive commodity product. Its magnetic force is indeed satisfactory, but the rotation force of the fixed camera head is a bit stuck. It is recommended to use a GoPro or Insta360 portable camera under non-high-speed movement.

This magnet is super strong !

Perfect mount for a cam on a meral surface

plenty of strength to hold my wyze camera upside-down

Strong magnet and doesn't scratch paint.

This will not move, do not try without having a mono pod or something to get some lever to remove, as this will NOT move by sliding....also, if you buy two...DO NOT attach together and expect to pry apart easy.I used with a Labpano Pilot GSV Camera and a 12in CF pole...perfect setup upt to 45mph

Really strong magnet which is the main reason I needed this. Only let down is that the securing screw for the ball/swivel joint doesn't really stop the camera moving round. Haven't tried it under a large amount of force (I don't need it for that purpose) but reckon it would probably move.

Used this mount for another in-car camera. Mounted it to the underside of the roof and never had a problem. Stuck like it was welded to the roof and camera mount is very good.

for the cost, i am completely satisfied